| 1) Click the "Be" button | 4) Click the "Connect to: " button |
| 2) Click "Preferences" | 5) Select "New" |
| 3) Start the "DialUpNetworking" application | |
 |
 |
Now you should be able to configure "DialUpNetworking" (under "Preferences") to use the device you have just added.
| 1) Click the "Be" button | 4) Click the "Connect to: " button |
| 2) Click "Preferences" | 5) Select "New" |
| 3) Start the "DialUpNetworking" application | |
|
|
| 7) In "Phone number: " Enter the phone
number of the service you dial to connect. |
|
| 6) In "Connection name: " Type the name
of the service you will connect to. |
8) In "User name: " Type your user name
for the service you will connect to. |
| 9) In "Password:" Enter your password for the
service that you connect to. |
|
|
 |
| 10) You may want to check the "Save Password" checkbox :-) | 12) Now choose your service providers' server type. |
| 11) You will need to enter your service providers' primary
and secondary Domain Name Server IP addresses. (if you don't know what they are, contact your service provider) |
Note: normally this will be 'Standard PPP'. If this doesn't work please consult your service provider to determine what login / authentication types they support. |
 |
 |
| 13) Click the "Modem..." button | |
| 14) In the window that opens, click the button
next to "Your modem is: " |
15) Select your modem from the popup list Note: See the BeOS Tip Server for instructions on adding a modem to the list. www.betips.net |
 |
 |
| 16) Choose the COM port you have assigned to your
modem. |
17) Choose the connection speed appropriate for your
modem. |
 |
 |